D1 SERIES TWO PLATEN INJECTION MOLDING MACHINE
1100T – 2400T
INNOVATIVE PRACTIVE OF
LARGE-TONNAGE
TWO PLATEN MACHINE
Brand | Yizumi |
---|
Independent high-pressure cylinder realizes mold opening under low speed and high pressure. Mold change through tie bar retraction in thecase of low factory ceiling height is also available.
High-rigidity L-shape guide rails on machine frame, with guiding precision up to 0.05mm, facilitate fast and steady motion of platens.
Linear guide rails, with the benefits of low resistance and quick acceleration, are a standard feature of D1 series. Incorporating otherfeatures, such as high-rigidity injection unit and ultrasonic displacement sensors, D1 series realizes accurate position control and high repeatability of part weight.
D1 series employs the fully oil-cooled two-headed motor-driven servo system. It eliminates the influence of instability in machine operation due to the work environment and reduces energy consumption of hydraulic circuit. Synchronized drive technology makes hydraulic circuit response faster and movements more efficient.
D1 series adopts Austria’s KEBA control system, with double CPUs, 1ms of scan cycle and high reliability. With the use of the high-response dual proportional valve control technology, mold opening and closing are fast and repeatability is high.
Real-time remote control, online conversion of languages and units and quick settings page for easy and convenient operation are available.
The control system has data storage and memory functions, multi-level user access authorization and multiple protections of equipment andpeople through software and hardware.
Independent high-pressure cylinder realizes mold opening under low speed and high pressure. Mold change through tie bar retraction in thecase of low factory ceiling height is also available.
High-rigidity L-shape guide rails on machine frame, with guiding precision up to 0.05mm, facilitate fast and steady motion of platens.
Linear guide rails, with the benefits of low resistance and quick acceleration, are a standard feature of D1 series. Incorporating otherfeatures, such as high-rigidity injection unit and ultrasonic displacement sensors, D1 series realizes accurate position control and high repeatability of part weight.
D1 series employs the fully oil-cooled two-headed motor-driven servo system. It eliminates the influence of instability in machine operation due to the work environment and reduces energy consumption of hydraulic circuit. Synchronized drive technology makes hydraulic circuit response faster and movements more efficient.
D1 series adopts Austria’s KEBA control system, with double CPUs, 1ms of scan cycle and high reliability. With the use of the high-response dual proportional valve control technology, mold opening and closing are fast and repeatability is high.
Dry cycle is short. Compared with a three-platen machine with the same clamp tonnage, mold opening and closing during dry cycle is about 55% faster, which directly improves efficiency and production capacity.
Repeatability of mold-open position is up to ± 0.2mm, five times higher than that of a three-platen machine (proven by in-house 1300T machine test result), meeting high requirements of automated part removal and inserting.
Variation of force on tie bar ≤ 3‰, high mold-close accuracy, hardly any flash, higher stability of injection molding, part weight repeatability ≤3‰, significant savings in materials and cost reductions.